Cisco IE3000 : Première configuration

Le bloc d'alim externe de l'IE 3000 (en vert) est arrivé. Pas de problème pour le connecter. A noter en rouge la barette qui fait la liaison entre le switch et son alim et qui condamne l'un des deux contacts secs.
Lien consulter pour configurer la machine : http://www.cisco.com/en/US/docs/switches/lan/cisco_ie3000/hardware/quick/guide/ie3000gsg_fra.pdf
Pour rappel, Precision Time Protocol (PTP) IEEE 1588 est communément utilisé dans les milieux industriels pour la gestion des automates en temps réel et la précision attendue peut aller jusqu'à la nonaseconde.

Allumage de la bête :

Initializing Flash.
done.
Loading "flash:/ies-lanbase-mz.122-46.SE2/ies-lanbase-mz.122-46.SE2.bin"...@@@@ ...
File "flash:/ies-lanbase-mz.122-46.SE2/ies-lanbase-mz.122-46.SE2.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, IES Software (IES-LANBASE-M), Version 12.2(46)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 09-Feb-09 18:59 by gereddy
Image text-base: 0x00003000, data-base: 0x01400000
Initializing flashfs...
Using driver version 1 for media type 1
mifs[3]: 1 files, 1 directories
mifs[3]: Total bytes : 258048
mifs[3]: Bytes used : 122368
mifs[3]: Bytes available : 135680
mifs[3]: mifs fsck took 0 seconds.
mifs[3]: Initialization complete.
mifs[4]: 0 files, 1 directories
mifs[4]: Total bytes : 1806336
mifs[4]: Bytes used : 1024
mifs[4]: Bytes available : 1805312
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.
mifs[5]: 1 files, 1 directories
mifs[5]: Total bytes : 11096064
mifs[5]: Bytes used : 380416
mifs[5]: Bytes available : 10715648
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.
mifs[6]: 0 files, 1 directories
mifs[6]: Total bytes : 18192384
mifs[6]: Bytes used : 1024
mifs[6]: Bytes available : 18191360
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.
Using driver version 1 for media type 2
mifs[8]: 675 files, 26 directories
mifs[8]: Total bytes : 64094208
mifs[8]: Bytes used : 13286400
mifs[8]: Bytes available : 50807808
mifs[8]: mifs fsck took 1 seconds.
mifs[8]: Initialization complete.
...done Initializing flashfs.
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
Initial INIT state: hi
Initial DONE state: lo
Waiting for init to go high.
Waiting for done to go low.
Start FPGA programming (375883 bytes):
- \ / -
----------------------------------------------------------------
Cesium version information from file header:
a Cesium.ncd b 2vp4fg456 c 2008/ 6/30 d 13:29: 0
----------------------------------------------------------------
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
Waiting for Port download...Complete
cisco IE-3000-8TC (PowerPC405) processor (revision A0) with 126976K/4088K bytes of memory.
Processor board ID FOC1323Z4DT
Last reset from power-on
1 Virtual Ethernet interface
8 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:25:46:A2:04:80
Motherboard assembly number : 73-10855-10
Motherboard serial number : FOC13221MLA
Model revision number : A0
Motherboard revision number : A0
Model number : IE-3000-8TC
System serial number : FOC1323Z4DT
Top Assembly Part Number : 800-28538-01
Top Assembly Revision Number : A0
Version ID : V01
CLEI Code Number : COMVH00ARA
Hardware Board Revision Number : 0x02
CIP Serial Number : 0x43313332
SKU Brand Name : Cisco

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 10 IE-3000-8TC 12.2(46)SE2 IES-LANBASE-M

Press RETURN to get started!
*Mar 1 00:00:24.981: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 1 00:00:25.081: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar 1 00:00:45.868: %SYS-5-RESTART: System restarted --
Cisco IOS Software, IES Software (IES-LANBASE-M), Version 12.2(46)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 09-Feb-09 18:59 by gereddy

Switch>en
Switch#
Switch#setup

--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: yes
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.

Basic management setup configures only enough connectivity
for management of the system, extended setup will ask you
to configure each interface on the system
Would you like to enter basic management setup? [yes/no]: yes
Configuring global parameters:
Enter host name [Switch]: ie3000
The enable secret is a password used to protect access to
privileged EXEC and configuration modes. This password, after
entered, becomes encrypted in the configuration.
Enter enable secret: ******
The enable password is used when you do not specify an
enable secret password, with some older software versions, and
some boot images.
Enter enable password: ******
% Please choose a password that is different from the enable secret
Enter enable password: ******
The virtual terminal password is used to protect
access to the router over a network interface
Enter virtual terminal password: *****
Configure SNMP Network Management? [no]: yes
Community string [public]:
Current interface summary
Interface IP-Address OK? Method Status Protocol
Vlan1 unassigned YES unset up down
FastEthernet1/1 unassigned YES unset down down
FastEthernet1/2 unassigned YES unset down down
FastEthernet1/3 unassigned YES unset down down
FastEthernet1/4 unassigned YES unset down down
FastEthernet1/5 unassigned YES unset down down
FastEthernet1/6 unassigned YES unset down down
FastEthernet1/7 unassigned YES unset down down
FastEthernet1/8 unassigned YES unset down down
GigabitEthernet1/1 unassigned YES unset down down
GigabitEthernet1/2 unassigned YES unset down down
Enter interface name used to connect to the
management network from the above interface summary: FastEthernet1/1
Configuring interface FastEthernet1/1:
Configure IP on this interface? [no]: yes*
% Please answer 'yes' or 'no'.
Configure IP on this interface? [no]: yes
IP address for this interface: 192.168.0.1
Subnet mask for this interface [255.255.255.0] :
Class C network is 192.168.0.0, 24 subnet bits; mask is /24
Would you like to enable as a cluster command switch? [yes/no]: yes
Enter cluster name: RESO-INDUS
The following configuration command script was created:
hostname ie3000
enable secret 5 *************************
enable password ******
line vty 0 15
password *****
snmp-server community public
!
!
interface Vlan1
shutdown
no ip address
!
interface FastEthernet1/1
no shutdown
ip address 192.168.0.1 255.255.255.0
!
interface FastEthernet1/2
!
interface FastEthernet1/3
!
interface FastEthernet1/4
!
interface FastEthernet1/5
!
interface FastEthernet1/6
!
interface FastEthernet1/7
!
interface FastEthernet1/8
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
cluster enable RESO-INDUS
!
end

[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
Enter your selection [2]:
The enable password you have chosen is the same as your enable secret.
This is not recommended. Re-enter the enable password.

ie3000#sh ru
Building configuration...
Current configuration : 1481 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ie3000
!
boot-start-marker
boot-end-marker
!
enable secret * *****
enable password *****
!
no aaa new-model
system mtu routing 1500
ptp mode e2etransparent
ptp priority1 128
ptp priority2 128
ip subnet-zero
cluster enable RESO-INDUS 0
!
!
no mac authentication
mac authentication table version 0
spanning-tree mode pvst
spanning-tree extend system-id
!
alarm profile defaultPort
alarm 3
syslog 3
notifies 3
!
alarm facility temperature primary relay major
alarm facility temperature primary syslog
alarm facility temperature primary notifies
!
vlan internal allocation policy ascending
!
interface FastEthernet1/1
ptp enable
!
interface FastEthernet1/2
ptp enable
!
interface FastEthernet1/3
ptp enable
!
interface FastEthernet1/4
ptp enable
!
interface FastEthernet1/5
ptp enable
!
interface FastEthernet1/6
ptp enable
!
interface FastEthernet1/7
ie3000#